Clip Grip Graphic Frame System

Clip Grip Graphic Frame System

Wall Graphics

Clip Grip Graphic Frame System

Wall Graphics

Clip Grip Graphic Frame System

Clip Grip Graphic Frame System

Clip Grip Graphic Frame System

The Clip Grip Graphic Frame SystemTM is a light aluminum extrusion. Its new design offers some unique features to make its installation even easier and faster. The frame was designed for small to mid-sized indoor or outdoor framed banners and signs.

Installation Information:
A groove to guide the drill bit during the drilling.  This groove was designed to avoid the drill bit to skid on the flat aluminum leg and so improve the rapidity of the drilling.

Long leg to facilitate drilling and screwing the extrusion. The length of the leg is 11/16” (17.5 mm) to accommodate a large range of drill bits and types of screws used for fixing the extrusion on a wall.

Use the screws you want. No need to pay extra attention to the shape or size of screw heads. You have 0.246” (6.25 mm) of space from the extrusion to the graphic. This will allow the use of many screws, including Tapcon (as show in the picture).

Fill Out Form

For Free Mockup & Quote

Vertical Tabs

We Value Your Privacy
or Call 800.790.7611